Drilling screw, countersunk head with H cross recess pias® WN 212, zinc-plated blue passivated A3K, H cross recess
pias steel zinc plated countersunk head H
SCR-DBIT-CS-H2-(A3K)-3,5X25
ZEBRA PIAS
Register now and access more than 125,000 products
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Datasheets(X)
CAD data (available after login)
 | |
Other standard | WN 215 |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 3.5 mm |
Length (l1) | 25 mm |
Head diameter (dk) | 6.8 mm |
Head height (k1) | 2.4 mm |
Internal drive | H2 |
Drill tip length (lp) | 3 mm |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Min./max. material thickness | 1.40-2.25 mm |
RoHS-compliant | Yes |
Last viewed
W-VD-A/S anchor rod for W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete, zinc-plated steel
Nova Pro Scala Crystal Plus H186 frame set
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Hexagonal bolt with thread up to the head ISO 4017, brass, plain
Hexagonal bolt with shank ISO 4014, steel 5.6, zinc-plated thick-film passivated (ZSML)
Tungsten carbide bur Klingspor HF 100 A
Jacket Planam Highline
Safety shoes S1P New Poseidon
Vernier calliper With torque fixing
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies