Drilling screw, countersunk head with H cross recess pias® WN 212, zinc-plated blue passivated A3K, H cross recess
pias steel zinc plated countersunk head H
SCR-DBIT-CS-H2-(A3K)-3,9X19
ZEBRA PIAS
Register now and access more than 125,000 products
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Datasheets(X)
CAD data (available after login)
 | |
Other standard | WN 212 |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 3.9 mm |
Length (l1) | 19 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 2.6 mm |
Internal drive | H2 |
Drill tip length (lp) | 3.1 mm |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Min. recommended substructure thickness | 1.5 mm |
Max. material thickness to be drilled through (metal) | 3 mm |
RoHS-compliant | Yes |
Last viewed
EPS profile thumbturn cylinder
Threaded rod DIN 976, steel 4.8, plain, shape A
Dunlop S5 safety wellington boot
Brad nail, type FN
PPE expansion set PLUS for ORSY-Safetower 5 pieces
Hexagonal bolt with thread up to the head DIN 933, A4 stainless steel, plain
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, plain
System wing door cabinet 12.8 805x770 mm
Hanging basket 90° For floor unit full-extension slide VS SUB Side, body width 150 mm
Twist drill bit HSS DIN 338 type RN 118°