Drilling screw, countersunk head with H cross recess pias® WN 212, zinc-plated blue passivated A3K, H cross recess
pias steel zinc plated countersunk head H
SCR-DBIT-CS-H2-(A3K)-4,2X25
ZEBRA PIAS
Register now and access more than 125,000 products
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Datasheets(X)
CAD data (available after login)
 | |
Other standard | WN 212 |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 25 mm |
Head diameter (dk) | 8.1 mm |
Head height (k1) | 2.8 mm |
Internal drive | H2 |
Drill tip length (lp) | 3.7 mm |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Min. recommended substructure thickness | 1.5 mm |
Max. material thickness to be drilled through (metal) | 3.5 mm |
RoHS-compliant | Yes |
Last viewed
Centre-grooved dowel pins ISO 8742 A1 stainless steel plain
Hexagon Socket Head Cap Screw
STC end mill Speedtwister-Universal, long, optional, five cutting edges, uneven angle of twist gradient, 3xD
Twist drill SC, WN 20, type N, internal cooling, TiAlN-UV
Vertical boltless rack
Wing-tip drilling screw with countersunk milling head With AW drive pias®
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Cylindrical pin, hardened DIN 6325, steel, plain
Twist drill bit, metal Ruko DIN 338 type N HSS-G plain 118°
Paint spray, high gloss