Drilling screw, countersunk head with H cross recess pias® WN 212, zinc-plated blue passivated A3K, H cross recess
pias steel zinc plated countersunk head H
SCR-DBIT-CS-H2-(A3K)-4,8X45
ZEBRA PIAS
Register now and access more than 125,000 products
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Datasheets(X)
CAD data (available after login)
 | |
Other standard | WN 212 |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 45 mm |
Head diameter (dk) | 9.5 mm |
Head height (k1) | 3.3 mm |
Internal drive | H2 |
Drill tip length (lp) | 4.5 mm |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Min. recommended substructure thickness | 1.7 mm |
Max. material thickness to be drilled through (metal) | 4 mm |
RoHS-compliant | Yes |
Last viewed
Occupational shoes
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hexagonal bolt with thread up to the head DIN 933, A4 80 stainless steel, plain
Universal connection piece for dust extraction
Hexagonal bolt with shank
Colour – blind rivets Round pan head
Work jumper, half-zip
Hexagon Socket Head Cap Screw
Hexagon Socket Head Cap Screw with centre, with low head
Tool clamp For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems