Drilling screw, countersunk head with H cross recess pias® WN 212, zinc-plated blue passivated A3K, H cross recess
pias steel zinc plated countersunk head H
SCR-DBIT-CS-H3-(A3K)-5,5X38
ZEBRA PIAS
Register now and access more than 125,000 products
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Datasheets(X)
CAD data (available after login)
 | |
Other standard | WN 212 |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 5.5 mm |
Length (l1) | 38 mm |
Head diameter (dk) | 10.8 mm |
Head height (k1) | 3.8 mm |
Internal drive | H3 |
Drill tip length (lp) | 4.55 mm |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Min. recommended substructure thickness | 2 mm |
Max. material thickness to be drilled through (metal) | 5.3 mm |
RoHS-compliant | Yes |
Last viewed
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, steel 10.9, plain
Double nipple, imperial thread
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Pipe protective cap W.TEC® COVER CAP WP 250 Polyethylene, yellow
TIPP® Smartlock GS ML pipe clamp Medium-load hinged and jointed clamp
Shim ring DIN 988, steel, plain
Stud screw Zinc-plated steel
Flat washer, turned for steel construction
Hexagonal bolt with thread up to the head