Drive-in nut
Drive-in nut zinc plated with impact tip
NUT-DRIVIN-(A2K)-H5X12-M3
Register now and access more than 125,000 products
- Zinc-plated steel, blue passivated
Connectors sit flush with no protrusions, ideal for furniture production.
Datasheets(X)
CAD data (available after login)
For processing in wood and wooden materials.
Drill a hole and drive the nut into the screw hole until it is seated firmly and flush with the wood.
 | |
Thread type x nominal diameter (D) | M3 |
Height (h1) | 5 mm |
Height of drive-in tip (a1) | 4 mm |
Width (b1) | 13 mm |
Drill hole diameter | 4.5 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Akura 44 profile thumbturn cylinder
Slotted countersunk head screw DIN 963, brass, plain
Parallel pin with chamfered ends DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h11
Hexagonal bolt with shank
Vulcanised fibre disc CS 570 Klingspor
Female thread quick-action coupling series 2000
Safety boots, S2
Hammer drill bit Max Quadro-S
High-visibility vest Neon
Safety sandals, S1