Drive-in nut
Drive-in nut zinc plated with impact tip
NUT-DRIVIN-(A2K)-H9X19-M6
Register now and access more than 125,000 products
- Zinc-plated steel, blue passivated
Connectors sit flush with no protrusions, ideal for furniture production.
Datasheets(X)
CAD data (available after login)
For processing in wood and wooden materials.
Drill a hole and drive the nut into the screw hole until it is seated firmly and flush with the wood.
 | |
Thread type x nominal diameter (D) | M6 |
Height (h1) | 9 mm |
Height of drive-in tip (a1) | 7 mm |
Width (b1) | 19 mm |
Drill hole diameter | 7.5 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 8.8, plain
Standard cable tie with plastic latch
T-shaped cutting ring fitting ISO 8434-1, zinc-nickel-plated steel
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with seal
Tapered pin, unhardened DIN 1 unhardened A4 stainless steel plain
Cable gland With lock nut
Stand-off installation system Amo®-Max spacer
Hexagonal bolt with thread up to head ISO 4017, steel strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Jamo 4 CS screw for adjustable distance mounting Steel zinc-plated partial thread with underhead thread for adjusting the countersunk head
Welding goggles uvex 9116