Driver flap MK Basis (panic lock)
Driver flap MK Basis
DRIVFLP-F.CSEQ-(F.MK-BAS2)
Register now and access more than 125,000 products
- The closing sequence selector ensures that the closing sequence of the inactive and active leaf occurs in the specified order, i.e. the active leaf always closes after the inactive leaf
- The function of a closing sequence selector is only ensured when the active leaf is opened to at least a certain angle (stop position)
- If the inactive leaf (full panic) is pressed open first, the driver flap ensures that the active leaf always also opens until it reaches this stop position
Dimensions subject to change. Subject to technical changes!
Datasheets(X)
 | |
Area of application | Object area, Closing sequence control |
Suitable for | Panic doors |
Suitable for number of doors | 2 |
Mounting option | Opposite hinge side |
DIN direction | DIN R/L |
Type of assembly | Screw-on |
Installation type | 0 - not applicable |
Material | Steel / plastic |
Surface | Zinc plated |
Colour | 0 - not applicable |
Min./max. length | 310-511 mm |
IP protection class | 0 - not applicable |
Suitable holding magnets | 0 - not applicable |
Locking range | 0 - not applicable |
Approval | 0 - not applicable |
Environmental Product Declaration | No |
EC declaration of conformity (CE) | No |
| Driver flap MK Basic 2 for closing sequence selectors on non-hinge side |
| Driver flap MK Basic 1 for closing sequence selectors on hinge side |
Last viewed
Round nose router bit With ball bearing
EPS profile thumbturn cylinder
Polo shirt
Simplex soft face hammer With steel housing
3/8 inch extension
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hammer nut, steel
Plastic expanding rivet without cap, with multiple slits
Compartment divider rod for vertical boltless rack
Lintel casing bracket For door closer with scissor arm mechanism or slide rail