Drop-in anchor for W-PL gypsum plasterboard
Gypsum plasterboard anchor, metal
DBL-(W-PL)-ST-10X30MM
Art.-no.
0903252002
EAN 4045989824137
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For quick and easy mounting in gypsum plasterboard walls/ceilings, without pre-drilling
Drop-in plasterboard anchor
- Sharp tip allows anchor to be driven in easily and precisely
- Easy to set for pre-positioned installation with one hammer stroke
- For use in conjunction with a suitable wood screw (dia. 3.5-5.0 mm, minimum length 30 mm)
- Centred screw guidance for optimal screw positioning
Instructions
Align the anchor horizontally
Mit einem Hammer ohne Vorbohren bündig setzen
Align the fixture and secure it using a suitable anchor/wood screw
Screw in the screw flush with the fixture
Product information
Datasheets(X)
Application area
For fastening lightweight fixtures:
- Lamps and lights
- Pictures
- Electrical accessories
- Decorative objects
Instructions
- Hold the anchor horizontally and drive it in flush with a hammer.
- Select a suitable wood or anchor screw (dia. 3.5-5.0 mm, minimum length 30 mm) - note: take the fixture thickness into account.
- Drive the screw through the fixture and into the anchor until it is flush.
- Note the load capacity according to the load direction (transversal/straight pull).
Type description | W-GS/M |
Anchor diameter | 10 mm |
Anchor length (l) | 30 mm |
Material | Steel |
Minimum component thickness (d) | 9 mm |
Required particle-board screw diameter | 3.5 - 5 mm |
Recommended loads in gypsum plasterboard of 12.5 mm | |
Drill bit diameter ddrill | no pre-drilling required |
Plate thickness da,rec | 12.5 mm |
Screw diameter ds,rec | 4 mm |
Min. length of thread engagement ls,min | 27 mm |
Max. recommended tensile load* Frec | 0.10 kN |
Max. recommended shear load* Vrec | 0.35 kN |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!