Ducting clamp DIN3015-1, lightweight series, smooth inner surface, W.TEC series
DIN 3015-1 PA inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/1-PA-G-SZ1-12
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 0 - M6 x 30
- 1 - M6 x 30
- 2 - M6 x 35
- 3 - M6 x 40
- 4 - M6 x 45
- 5 - M6 x 60
- 6 - M6 x 70
- 7 - M6 x 100
- 8 - M6 x 125
Hexagon socket screw ISO 4762
DIN size - screw dimensions (metric)
- 0 - M6 x 20
- 1 - M6 x 20
- 2 - M6 x 25
- 3 - M6 x 30
- 4 - M6 x 35
- 5 - M6 x 50
- 6 - M6 x 60
- 7 - M6 x 90
- 8 - M6 x 110
Datasheets(X)
CAD data (available after login)
 | |
DIN | 3015-1 |
Material | PA - Polyamide |
Colour | Black |
Design | Inner surface smooth |
Suitable for | Tubes |
Nominal size according to DIN | 1 |
Internal diameter (d1) | 12 mm |
Hole distance (e1) | 20 mm |
Length (l1) | 33.4 mm |
Width (b4) | 30 mm |
Height (h1) | 26.4 mm |
Last viewed
Transparent single-pole voltage tester
Connection cable For SB 13-XE impact drills
Centre-grooved dowel pins ISO 8742 steel plain
Adapter plate For ORSY® BULL worktop
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Crimp cable lug, blade connector Polyamide insulated
Safety boots, S3
Tungsten carbide bur with 3R teeth
Cylinder tapping screw, C shape with hexagon socket
Fall arrester - counterweight