Ducting clamp DIN3015-1, lightweight series, smooth inner surface, W.TEC series
DIN 3015-1 PA inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/1-PA-G-SZ3-25,4
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 0 - M6 x 30
- 1 - M6 x 30
- 2 - M6 x 35
- 3 - M6 x 40
- 4 - M6 x 45
- 5 - M6 x 60
- 6 - M6 x 70
- 7 - M6 x 100
- 8 - M6 x 125
Hexagon socket screw ISO 4762
DIN size - screw dimensions (metric)
- 0 - M6 x 20
- 1 - M6 x 20
- 2 - M6 x 25
- 3 - M6 x 30
- 4 - M6 x 35
- 5 - M6 x 50
- 6 - M6 x 60
- 7 - M6 x 90
- 8 - M6 x 110
Datasheets(X)
CAD data (available after login)
 | |
DIN | 3015-1 |
Material | PA - Polyamide |
Colour | Black |
Design | Inner surface smooth |
Suitable for | Tubes |
Nominal size according to DIN | 3 |
Internal diameter (d1) | 25.4 mm |
Hole distance (e1) | 33 mm |
Length (l1) | 48 mm |
Width (b4) | 30 mm |
Height (h1) | 34 mm |
Last viewed
Add-on torque wrench head Open-end add-on torque wrench head drive Stahlwille 731/40
Straight pin, unhardened DIN 7, A1 stainless steel, plain
Spacer block/mounting plate
Round head screw with square neck DIN 603, A4 stainless steel
Wing door cabinet, depth 500 mm With W-SLB system storage boxes, size 1, 2, 3 and 4
Flat head tapping screw, type C with hexagon socket ISO 14585, steel, zinc-plated, blue passivated, shape C (with tip)
Work trousers
Work dungarees
Hexagonal bolt with thread up to the head
S1PL safety shoe New Balance Logic 2143