Ducting clamp DIN3015-1, lightweight series, smooth inner surface, W.TEC series
DIN 3015-1 PA inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/1-PA-G-SZ7-57,2
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 0 - M6 x 30
- 1 - M6 x 30
- 2 - M6 x 35
- 3 - M6 x 40
- 4 - M6 x 45
- 5 - M6 x 60
- 6 - M6 x 70
- 7 - M6 x 100
- 8 - M6 x 125
Hexagon socket screw ISO 4762
DIN size - screw dimensions (metric)
- 0 - M6 x 20
- 1 - M6 x 20
- 2 - M6 x 25
- 3 - M6 x 30
- 4 - M6 x 35
- 5 - M6 x 50
- 6 - M6 x 60
- 7 - M6 x 90
- 8 - M6 x 110
Datasheets(X)
CAD data (available after login)
 | |
Nominal size according to DIN | 7 |
Internal diameter (d1) | 57.2 mm |
Hole distance (e1) | 94 mm |
Length (l1) | 119.4 mm |
Width (b4) | 30 mm |
Height (h1) | 92 mm |
DIN | 3015-1 |
Material | PA - Polyamide |
Colour | Black |
Design | Inner surface smooth |
Last viewed
Work jacket
Hexagonal bolt with thread up to the head
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1 ISO 4017, A2-70 stainless steel, plain, with nut ISO 4032
Blind rivet, closed, with break mandrel and countersunk head ISO 15974, sleeve: aluminium, mandrel: steel
Stud with threaded end ≈ 1.25 d DIN 939, steel 5.8, plain
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
System cabinet workbench 1500 mm with 2 undercounter blocks 8.6
Sunscreen system
Hexagon tapping screw DIN 7976, zinc-plated steel, blue passivated (A2K), shape C (with tip)
Single anchor point load substrate