Ducting clamp DIN3015-1, lightweight series, smooth inner surface, W.TEC series
DIN 3015-1 PP inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/1-PP-G-SZ1-6
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 0 - M6 x 30
- 1 - M6 x 30
- 2 - M6 x 35
- 3 - M6 x 40
- 4 - M6 x 45
- 5 - M6 x 60
- 6 - M6 x 70
- 7 - M6 x 100
- 8 - M6 x 125
Hexagon socket screw ISO 4762
DIN size - screw dimensions (metric)
- 0 - M6 x 20
- 1 - M6 x 20
- 2 - M6 x 25
- 3 - M6 x 30
- 4 - M6 x 35
- 5 - M6 x 50
- 6 - M6 x 60
- 7 - M6 x 90
- 8 - M6 x 110
Datasheets(X)
CAD data (available after login)
 | |
DIN | 3015-1 |
Material | PP - Polypropylene |
Colour | Green |
Design | Inner surface smooth |
Suitable for | Tubes |
Nominal size according to DIN | 1 |
Internal diameter (d1) | 6 mm |
Hole distance (e1) | 20 mm |
Length (l1) | 33.4 mm |
Width (b4) | 30 mm |
Height (h1) | 26.4 mm |
Last viewed
Low-cut safety shoes, S3
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Hole saw assortment/set Ruko 126302 bimetal HSCo8 assortment 6 pieces
Plastic multi-purpose anchor SHARK® Pro
Timing tool set 22 pieces, for PSA Group 1.4-1.6-1.8-2.0-2.2, petrol/diesel
Machine tap Speedtap 4.0-Ultra Hard Steel 63 HRC, straight grooved For metric ISO fine thread DIN 13
Seaming pliers, curved 90 degrees
Aluminium clip
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)