Ducting clamp DIN3015-1, lightweight series, smooth inner surface, W.TEC series
DIN 3015-1 PP inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/1-PP-G-SZ7-57,2
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 0 - M6 x 30
- 1 - M6 x 30
- 2 - M6 x 35
- 3 - M6 x 40
- 4 - M6 x 45
- 5 - M6 x 60
- 6 - M6 x 70
- 7 - M6 x 100
- 8 - M6 x 125
Hexagon socket screw ISO 4762
DIN size - screw dimensions (metric)
- 0 - M6 x 20
- 1 - M6 x 20
- 2 - M6 x 25
- 3 - M6 x 30
- 4 - M6 x 35
- 5 - M6 x 50
- 6 - M6 x 60
- 7 - M6 x 90
- 8 - M6 x 110
Datasheets(X)
CAD data (available after login)
 | |
Nominal size according to DIN | 7 |
Internal diameter (d1) | 57.2 mm |
Hole distance (e1) | 94 mm |
Length (l1) | 119.4 mm |
Width (b4) | 30 mm |
Height (h1) | 92 mm |
DIN | 3015-1 |
Material | PP - Polypropylene |
Colour | Green |
Design | Inner surface smooth |
Last viewed
Hexagon nut, low profile, with clamping piece (non-metal insert), fine thread DIN 985, A2 stainless steel, plain
EPS profile thumbturn cylinder
High-visibility work dungarees
Resin remover concentrate HEK 5000
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
K Plus insulation pipe clamp With separate insulation part
High-strength screw retainer
Tapping screw, countersunk head
Round, multi-hole grommet
Pan head tapping screws with recessed head ISO 7049, A2-70 stainless steel, plain