Ducting clamp DIN3015-2, heavy-duty series, smooth inner surface, W.TEC series
DIN 3015-2 PA inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/2-PA-G-SZ1-13,5
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 1 - M10 x 45
- 2 - M10 x 60
- 3 - M10 x 70
- 4 - M12 x 100
- 5 - M16 x 130
- 6 - M20 x 190
- 7 - M24 x 220
- 8 - M30 x 300
- 9 - M30 x 450
- 10 - M30 x 560
Hexagon socket screw ISO 4762
DIN size - screw dimensions (metric)
- 1 - M10 x 30
- 2 - M10 x 40
- 3 - M10 x 50
- 4 - M12 x 80
Datasheets(X)
CAD data (available after login)
 | |
DIN | 3015-2 |
Material | PA - Polyamide |
Colour | Black |
Design | Inner surface smooth |
Suitable for | Tubes |
Nominal size according to DIN | 1 |
Internal diameter (d1) | 13.5 mm |
Hole distance (e1) | 33 mm |
Length (l1) | 56 mm |
Width (b4) | 30 mm |
Height (h1) | 30 mm |
Last viewed
Striker plate For tubular frame mortise locks RR02, E-opener
Multi-purpose grease IV
Cut-resistant gloves Showa 4561
Neutral silicone Perfect
Hexagonal bolt with shank
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, zinc-plated blue passivated (A2K)
Speed cutting disc For stainless steel
Blind rivet, flat head
Cylindrical grooved pin with chamfer DIN 1473, A1 stainless steel, plain
HSCo8 keyway end mill, short, triple blade, centre-cutting