Ducting clamp DIN3015-2, heavy-duty series, smooth inner surface, W.TEC series
DIN 3015-2 PP inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/2-PP-G-SZ1-6
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 1 - M10 x 45
- 2 - M10 x 60
- 3 - M10 x 70
- 4 - M12 x 100
- 5 - M16 x 130
- 6 - M20 x 190
- 7 - M24 x 220
- 8 - M30 x 300
- 9 - M30 x 450
- 10 - M30 x 560
Hexagon socket screw ISO 4762
DIN size - screw dimensions (metric)
- 1 - M10 x 30
- 2 - M10 x 40
- 3 - M10 x 50
- 4 - M12 x 80
Datasheets(X)
CAD data (available after login)
 | |
DIN | 3015-2 |
Material | PP - Polypropylene |
Colour | Green |
Design | Inner surface smooth |
Suitable for | Tubes |
Nominal size according to DIN | 1 |
Internal diameter (d1) | 6 mm |
Hole distance (e1) | 33 mm |
Length (l1) | 56 mm |
Width (b4) | 30 mm |
Height (h1) | 30 mm |
Last viewed
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Single-cut tap for W.TEC® INSERT COIL helical inserts - shape D, made of HSS
Key, high profile DIN 6885, steel, plain, shape AB
Washer For bolt
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Hexagon socket bit
3/8-inch cardan joint insert For external TX screws
Locking system DUAL
Wing screw, square wings Similar to DIN 316, A4 stainless steel, plain, pressed
Hexagon socket set screw with pin ISO 4028, A2 stainless steel, 21H, plain