Ducting clamp DIN3015-2, heavy-duty series, smooth inner surface, W.TEC series
DIN 3015-2 PP inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/2-PP-G-SZ4-48,3
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 1 - M10 x 45
- 2 - M10 x 60
- 3 - M10 x 70
- 4 - M12 x 100
- 5 - M16 x 130
- 6 - M20 x 190
- 7 - M24 x 220
- 8 - M30 x 300
- 9 - M30 x 450
- 10 - M30 x 560
Hexagon socket screw ISO 4762
DIN size - screw dimensions (metric)
- 1 - M10 x 30
- 2 - M10 x 40
- 3 - M10 x 50
- 4 - M12 x 80
Datasheets(X)
CAD data (available after login)
 | |
Nominal size according to DIN | 4 |
Internal diameter (d1) | 48.3 mm |
Hole distance (e1) | 90 mm |
Length (l1) | 117 mm |
Width (b4) | 45 mm |
Height (h1) | 87 mm |
DIN | 3015-2 |
Material | PP - Polypropylene |
Colour | Green |
Design | Inner surface smooth |
Last viewed
Low-cut safety shoes, S1
Deep groove ball bearing FAG
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, zinc-plated, blue passivated (A2K)
Round head screw with square neck and nut DIN 603, steel 4.8, plain, with nut
Sealing ring, aluminium, shape A
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HB shank
Angular joint shape CS with retaining clip, left-hand thread DIN 71802, steel, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 10.9, plain