Ducting clamp DIN3015-3, double series, smooth inner surface, W.TEC series
DIN 3015-3 PA inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/3-PA-G-SZ1-6
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Hexagon socket screw ISO 4762
DIN size - dimensions (mm/inch)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Datasheets(X)
CAD data (available after login)
 | |
Nominal size according to DIN | 1 |
Internal diameter (d1) | 6.0 mm |
Internal diameter 2 (d2) | 6.0 mm |
Length (l1) | 36 mm |
Width (b4) | 30 mm |
Height (h1) | 26 mm |
DIN | 3015-3 |
Material | PA - Polyamide |
Colour | Black |
Design | Inner surface smooth |
Last viewed
Round head screw with square neck
Replaceable cup system lid
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 10.9, plain
Ear defenders
Adjustable straight sealing cone male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with o-ring
Wiring duct, VKW, standard With predetermined breaking points on the bars
Roofing screw EUROFAST® Extra EDS-BZTHD
Sledgehammer Halder SIMPLEX sledgehammer Series 3728
Compact workshop trolley
Straight male fitting ISO 8434-1, stainless steel 1.4571, NPT male thread