Ducting clamp DIN3015-3, double series, smooth inner surface, W.TEC series
DIN 3015-3 PA inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/3-PA-G-SZ1-6,4
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Hexagon socket screw ISO 4762
DIN size - dimensions (mm/inch)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Datasheets(X)
CAD data (available after login)
 | |
Nominal size according to DIN | 1 |
Internal diameter (d1) | 6.4 mm |
Internal diameter 2 (d2) | 6.4 mm |
Length (l1) | 36 mm |
Width (b4) | 30 mm |
Height (h1) | 26 mm |
DIN | 3015-3 |
Material | PA - Polyamide |
Colour | Black |
Design | Inner surface smooth |
Last viewed
Die For standard metric ISO thread HSCo Multi Performance
Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
Hammer drill bit Plus Quadro-S
MFD-S multi-purpose drill bit with straight shank
Low-cut safety shoes, S2
Soft Interface foam
W-VIZ-A anchor rod, A4 stainless steel for W-VIZ/A4 injection systems (concrete)
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
Hexagon nut DIN 934, steel I8I, hot-dip galvanised (hdg)
Top bracket latch for insect protection