Ducting clamp DIN3015-3, double series, smooth inner surface, W.TEC series
DIN 3015-3 PA inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/3-PA-G-SZ2-16
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Hexagon socket screw ISO 4762
DIN size - dimensions (mm/inch)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Datasheets(X)
CAD data (available after login)
 | |
Nominal size according to DIN | 2 |
Internal diameter (d1) | 16.0 mm |
Internal diameter 2 (d2) | 16.0 mm |
Length (l1) | 53 mm |
Width (b4) | 30 mm |
Height (h1) | 26.2 mm |
DIN | 3015-3 |
Material | PA - Polyamide |
Colour | Black |
Design | Inner surface smooth |
Last viewed
Safety boots, S4
GEFU® thread-rolling screw With Taptite 2000® thread, cylinder head and hexalobular drive
Safety boots, S3
Weld-in bulkhead fitting ISO 8434-1, zinc-nickel-plated steel
Connection sleeve with bolt For system connector SV 20 E
Slotted flat-head screw DIN 85, A2-70 stainless steel, plain
Clamping pin/clamping sleeve ISO 13337 spring steel plain
EPS profile double cylinder
Divider assortment With system boxes for system dimensions 12.6
HSCo Longlife TiAlN+ red-ring machine tap for blind holes DIN 371/376