Ducting clamp DIN3015-3, double series, smooth inner surface, W.TEC series
DIN 3015-3 PA inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/3-PA-G-SZ5-33,7
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Hexagon socket screw ISO 4762
DIN size - dimensions (mm/inch)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Datasheets(X)
CAD data (available after login)
 | |
Nominal size according to DIN | 5 |
Internal diameter (d1) | 33.7 mm |
Internal diameter 2 (d2) | 33.7 mm |
Length (l1) | 106 mm |
Width (b4) | 30 mm |
Height (h1) | 52 mm |
DIN | 3015-3 |
Material | PA - Polyamide |
Colour | Black |
Design | Inner surface smooth |
Last viewed
Welding plate DIN3015-1, long version (L), W.TEC series
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Power screwdriver bit Hexagon
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hexagon tapping screw, shape C ISO 1479 A2 stainless steel, plain
Circlip for shaft, heavy-duty design, shape AS
W-VD-A/F W-VD-A anchor rod hot-dip galvanised steel
Low-cut safety shoes, S2
Cheese head screw with hexagon socket ISO 4762/DIN 912, steel 12.9, plain, manufacturer HOLO-KROME®
Order protector with magnetic fastening