Ducting clamp DIN3015-3, double series, smooth inner surface, W.TEC series
DIN 3015-3 PA inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/3-PA-G-SZ5-42
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Hexagon socket screw ISO 4762
DIN size - dimensions (mm/inch)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Datasheets(X)
CAD data (available after login)
 | |
Nominal size according to DIN | 5 |
Internal diameter (d1) | 42.0 mm |
Internal diameter 2 (d2) | 42.0 mm |
Length (l1) | 106 mm |
Width (b4) | 30 mm |
Height (h1) | 52 mm |
DIN | 3015-3 |
Material | PA - Polyamide |
Colour | Black |
Design | Inner surface smooth |
Last viewed
Eco S3 safety boots
Safety shoe S2
ECOFAST® chipboard screw Steel, zinc-plated yellow, partial thread, countersunk milling head, PZ drive
Work trousers
Work dungarees Kübler Image Dress 3347 3411
Sidewall lining
Hexagonal bolt with half dog point and small hexagon
Hexagon Socket Head Cap Screw ISO 4762, brass, plain
Round head screw with square neck and nut DIN 603, steel 4.8, plain, with nut
Locking system DUAL