Ducting clamp DIN3015-3, double series, smooth inner surface, W.TEC series
DIN 3015-3 PP inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/3-PP-G-SZ1-6,4
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Hexagon socket screw ISO 4762
DIN size - dimensions (mm/inch)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
 | |
Nominal size according to DIN | 1 |
Internal diameter (d1) | 6.4 mm |
Internal diameter 2 (d2) | 6.4 mm |
Length (l1) | 36 mm |
Width (b4) | 30 mm |
Height (h1) | 26 mm |
DIN | 3015-3 |
Material | PP - Polypropylene |
Colour | Green |
Design | Inner surface smooth |
Suitable for | Tubes |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
W-SLB system storage box
One fleece jacket
Low-cut safety shoes, S1
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
AL 920 door handle on inner plate With CK punch
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
Universal protector GPN 900 A Polyethylene (PE-LD), natural
Compartment dividers For system drawers
Work jacket
Thin-walled heat-shrink hose Without internal adhesive
