Ducting clamp DIN3015-3, double series, smooth inner surface, W.TEC series
DIN 3015-3 PP inner surface smooth W.TEC series
DCTNGCLMP-DIN3015/3-PP-G-SZ2-15
W.TEC
Register now and access more than 125,000 products
When fastening hoses and cables, it is recommended that clamps with a smooth inner surface are used without pre-loading. Gap s1 is no longer necessary. This reduces the block height h1.
Screw sizes to be used
Hexagon head screw DIN 931/933 and ISO 4014/4017
In combination with cover plate
DIN size - screw dimensions (metric)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Hexagon socket screw ISO 4762
DIN size - dimensions (mm/inch)
- 1 - M6 x 35
- 2 - M8 x 35
- 3 - M8 x 45
- 4 - M8 x 50
- 5 - M8 x 60
Datasheets(X)
CAD data (available after login)
 | |
Nominal size according to DIN | 2 |
Internal diameter (d1) | 15.0 mm |
Internal diameter 2 (d2) | 15.0 mm |
Length (l1) | 53 mm |
Width (b4) | 30 mm |
Height (h1) | 26.2 mm |
DIN | 3015-3 |
Material | PP - Polypropylene |
Colour | Green |
Design | Inner surface smooth |
Last viewed
Designer furniture handle D handle, conical
Hexagon Socket Head Cap Screw
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Twist drill bit HSCo DIN 338 type RN MAGMA
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, plain
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)
Double pipe clamp
CLIP-O-FLEX® multi-purpose level For assembly workstation with opening cut-out 975 mm
Adapter plate For ORSY® BULL worktop