Dust extraction drill bit Max M
Dust extraction drill bit Max M
EXTRDRL-MAX-M-D22-L600-WL400MM
Register now and access more than 125,000 products
Dust-free drilling
- The dust is sucked up immediately as it occurs in the drill hole
- Protects the user from damage to health
- Increases the service life
- No subsequent cleaning of the drill hole is required
- Significant prevention of dust produced on the construction site
Perfect drilling properties over the entire service life
- Head geometry that is tailored to the drill bit diameter
- 14–16 mm: One-piece carbide element — maximised attachment surface with the steel body gives high stability
- 18-35 mm: Multi-piece carbide element for faster drilling progress, and trisection design to improve buffering of torsional forces
Suitable for all standard, certified vacuum cleaners of dust class M
Flexible, one-piece rubber vacuum adapter
Precise spot drilling
Special self-centring tip
- Iron reinforcements may only be drilled through with permission from a structural engineer
- Observe the enclosed operating instructions
- Only for use with dust class M vacuums
Datasheets(X)
- Clean, dust-free drill holes for setting chemical anchors
- Drill holes for subsequent installation or for replacing incorrectly set reinforcement bars
- Work in critical areas that must be kept free of dust, such as public buildings, hospitals etc.
- Renovation work where dust should be avoided and the user should be protected
Last viewed
Fibreglass rod For CPS cable feed device
System assortment 4.4.1 combination wrenches, metric, 15° angled ring 17 pieces
EPS profile double cylinder
Multi-bit screw attachment ASSY®mat 80
Hexagonal bolt with thread up to the head DIN 933, A4 80 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
HSCo Longlife TiAlN+ red-ring machine tap for through holes DIN 371/376
16° circular collated nail With ring-shaped shank
Halogen bulb Nightstar +90 % For active, safety-conscious drivers
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment