Dust protection door
Dust protection door set 2 pieces
DSTPROTDIVIDR-KIT-ADHTPE-L2,2XW1,1M-2PCS
Register now and access more than 125,000 products
Special dustproof but air-permeable fleece
- Protects adjacent rooms from dust whilst renovations are carried out
- Also screens the site and protects against unauthorised access to the room
- Air-permeable material allows for fresh air supply
High-quality, easy-to-open zip fastening on both sides
Flexible uses for all door dimensions up to a maximum of 1 m x 2.10 m
Easiest assembly - The dust protection door is attached with double-sided adhesive tape and can then be removed from most surfaces without leaving any residue
Reusable
Adhesive tape must not be exposed to direct sunlight once applied. The surface must be dry and free from dust or grease. Paint or varnish must be completely cured. Do not use on marble or granite surfaces, very absorbent surfaces or surfaces with insufficient inner stability, such as poorly adhering paint. We recommend performing an adhesion test in an inconspicuous area.
Datasheets(X)
All tasks during which adjacent rooms must be protected from dust or dirt, e.g. renovation, electrical or plumbing work, painting, dry walling or floor sanding.
Material | Polypropylene fleece |
Adhesive base | Acrylate dispersion |
Height | 2.1 m |
Width | 1.1 m |
Passageway height | 1.9 m |
Passageway width | 0.7 m |
Length of adhesive tape | 7 m |
Width of adhesive tape | 38 mm |
Min. processing temperature | 15 °C |
Max. usage duration | 7 d |
Shelf life from production | 24 Month |
Conditions to maintain shelf life from production | at 20°C and 50% humidity |
Last viewed
Slotted headless screw with flat point DIN 427, steel, 14H, plain
Cylinder saw adapter A2 With ejection function
Transport and base plate
Safety boots, S3
Hexagonal bolt with shank
Powerbank Tubby printed
Storage box with cover
Multi-purpose drill bit Multipack MFD-S 1/4 inch hex shank, 6 pieces
Hexagon nut, high profile with clamping piece (non-metal insert), imperial
Machine screw tap, through hole Ruko M DIN 376 HSCo TiCN shape C