E30 fire protection duct outer corner
Fire protection duct outer corner E30
EXCRN-FP-F.FPDCT-E30-WHTE-1X45°-110X50
Register now and access more than 125,000 products
- E30 electrical duct for ensuring continued operation in accordance with DIN 4102 part 12
- Single-sided version and two-, three- and four-sided versions available
- Max. dimensions of E30: Outer dimensions: W 640 x H 260 mm and inner dimensions: W 520 x H 180 mm
- Can be installed directly on walls or ceilings using ceiling hangers or brackets, or on or around cable trays
- The sheet-metal duct is available in zinc-plated steel or with a coloured coating
- Sheet-metal duct with a maximum length of up to 2.3 m enables quick and easy installation
- Spacing of supporting structure ≤ 1.25 m
- Ducts and moulded parts can be made with custom dimensions for project-specific applications
When installing the fire protection duct, observe the installation instructions and test certificate no. P-MPA-E-19-010
Datasheets(X)
- Simple installation
- Enormous time savings and weight reduction: The panels do not need to be bonded, clamped or screwed in. Instead, the individual panels can be installed loose in the sheet-metal duct
- Easier to handle than conventional electrical ducts
- Installation by one person possible for all sizes
- Can be used for indoor and outdoor applications thanks to long-term protection against rain, frost and UV radiation
- The duct can be easily opened and closed multiple times for inspections or subsequent installations without damaging the channel
When installing the fire protection duct, observe the installation instructions and test certificate no. P-MPA-E-19-010
Width x height | 198 x 136 mm |
Length | 125 mm |
Width x height (internal dimension) | 110 x 50 mm |
Fire resistance rating | E30 |
Angle | 45 Degree |
Surface | Zinc plated |
Colour | White |
Material | Sheet steel |
Last viewed
Work dungarees
Cylindrical pin, hardened DIN 6325, steel, plain
Leather protective glove Ejendals TEGERA® 114
Pneumatic trolley jack P304S
WÜTOP® DB vapour retarder
1/2 inch socket wrench insert, metric
Rivet nuts, countersunk head assortment 605 pieces in system case 4.4.1.
Safety knife Martor Secupro Maxisafe 10150610.02
Bar handle, stainless steel
Tensioning roller screw connection