E90 fire protection duct
Fire protection duct E90
FPDCT-E-260X100-VZ-VE1/1M
Register now and access more than 125,000 products
- Simple installation
- Enormous time savings and weight reduction: The panels do not need to be bonded, clamped or screwed in. Instead, the individual panels can be installed loose or adjusted in the sheet-metal duct
- Easier to handle than conventional electrical ducts
- Installation by one person possible for all sizes
When installing the fire protection duct, observe the installation instructions and test certificate no. P-MPA-E-19-010
Datasheets(X)
- Can be used for indoor and outdoor applications thanks to long-term protection against rain, frost and UV radiation
- The duct can be easily opened and closed multiple times for inspections or subsequent installations without causing damage
- To be used in system [E4.1]
- E30-E90 electrical duct for ensuring continued operation in accordance with DIN 4102 part 12
- Single-sided version and two-, three- and four-sided versions available
- Max. dimensions of E90: outer dimensions: W 640 x H 300 mm and inner dimensions: W 520 x H 180 mm
- Can be installed directly on walls or ceilings using ceiling hangers or brackets, or on or around cable trays
- The sheet-metal duct is available in zinc-plated steel or with a coloured coating
- Sheet-metal duct with a maximum length of up to 2.3 m enables quick and easy installation
- Spacing of supporting structure ≤ 1.25 m
- Ducts and moulded parts can be made with custom dimensions for project-specific applications
Width x height | 388 x 226 mm |
Length | 1000 mm |
Colour | Silver grey |
Width x height (internal dimension) | 260 x 100 mm |
Fire resistance rating | E90 |
Surface | Zinc plated |
Material | Sheet steel |
Last viewed
ASSY®plus 4 CSMP SPECIAL universal screw Hardened zinc-plated steel partial thread countersunk head
Safety shoe S1
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
STARLINE® work vest
Knurled nuts, low type DIN 467, brass, nickel-plated
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, plain
Coloured rubber grommets made from polychloroprene rubber Insulating grommets, coloured, CR
Interior trim clip type 1 suitable for oval holes
Locking system, DPS
Outer corner For FB windowsill duct