E90 fire protection duct
Fire protection duct E90
FPDCTE-60X50-VZ-VE1/1M
Register now and access more than 125,000 products
- Simple installation
- Enormous time savings and weight reduction: The panels do not need to be bonded, clamped or screwed in. Instead, the individual panels can be installed loose or adjusted in the sheet-metal duct
- Easier to handle than conventional electrical ducts
- Installation by one person possible for all sizes
When installing the fire protection duct, observe the installation instructions and test certificate no. P-MPA-E-19-010
Datasheets(X)
- Can be used for indoor and outdoor applications thanks to long-term protection against rain, frost and UV radiation
- The duct can be easily opened and closed multiple times for inspections or subsequent installations without causing damage
- To be used in system [E4.1]
- E30-E90 electrical duct for ensuring continued operation in accordance with DIN 4102 part 12
- Single-sided version and two-, three- and four-sided versions available
- Max. dimensions of E90: outer dimensions: W 640 x H 300 mm and inner dimensions: W 520 x H 180 mm
- Can be installed directly on walls or ceilings using ceiling hangers or brackets, or on or around cable trays
- The sheet-metal duct is available in zinc-plated steel or with a coloured coating
- Sheet-metal duct with a maximum length of up to 2.3 m enables quick and easy installation
- Spacing of supporting structure ≤ 1.25 m
- Ducts and moulded parts can be made with custom dimensions for project-specific applications
Width x height | 188 x 176 mm |
Length | 1000 mm |
Colour | Silver grey |
Width x height (internal dimension) | 60 x 50 mm |
Fire resistance rating | E90 |
Surface | Zinc plated |
Material | Sheet steel |
Last viewed
Pan head screw with Z cross recess DIN 7985, steel 4.8, plain
Sanding disc film Mirka Polarstar
Twist drill bit HSS DIN 338 type RN 130°
Locking system, DPS
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Vionaro accessories set for inner bezel
ASME B18.6.3 steel zinc-plated slotted UNC
Short sanding belt Klingspor LS 309 XH
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A4 stainless steel
Hexagon Socket Head Cap Screw