E90 fire protection duct outer corner
Fire protection duct outer corner E90
EXCRN-FP-F.FPDCT-E90-WHTE-1X45°-100X100
Register now and access more than 125,000 products
- E90 electrical duct for ensuring functional maintenance in accordance with DIN 4102 part 12
- Single-sided version and two-, three- and four-sided versions available
- Max. dimensions of E90: Outer dimensions: W 640 x H 300 mm and inner dimensions: W 520 x H 180 mm
- Can be installed directly on walls or ceilings using ceiling hangers or brackets, or on or around cable trays
- The sheet-metal duct is available in zinc-plated steel or with a coloured coating
- Sheet-metal duct with a maximum length of up to 2.3 m enables quick and easy installation
- Spacing of supporting structure ≤ 1.25 m
- Ducts and moulded parts can be made with custom dimensions for project-specific applications
When installing the fire protection duct, observe the installation instructions and test certificate no. P-MPA-E-19-010
Datasheets(X)
- Simple installation
- Enormous time savings and weight reduction: The panels do not need to be bonded, clamped or screwed in. Instead, the individual panels can be installed loose or adjusted in the sheet-metal duct
- Easier to handle than conventional electrical ducts
- Installation by one person possible for all sizes
- Can be used for indoor and outdoor applications thanks to long-term protection against rain, frost and UV radiation
- The duct can be easily opened and closed multiple times for inspections or subsequent installations without causing damage
When installing the fire protection duct, observe the installation instructions and test certificate no. P-MPA-E-19-010
Width x height | 228 x 226 mm |
Length | 125 mm |
Width x height (internal dimension) | 160 x 100 mm |
Fire resistance rating | E90 |
Angle | 45 Degree |
Surface | Zinc plated |
Colour | White |
Material | Sheet steel |
Last viewed
Hexagon nut with fine thread ISO 8673, steel 10, zinc-plated blue passivated (A2K)
Hexagonal bolt with shank
Holder set 4 25-piece system for perforated plates
Type 90 staples
Low-cut safety shoes, S1P
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Machine tap Speedtap 4.0-Uni/Inox, spiral-fluted For Whitworth pipe thread DIN ISO 228
Nozzle For cordless nut riveter ANG 310
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537K, 3xD short, 4 drill heels, with internal cooling
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive