ECOFAST ASSY® 3.0 Hardwood screw, stainless steel
ECOFAST ASSY hdwd screw sst A2 VD milling head AW
SCR-CS-CTRHD-HRDWO-A2-AW20-4X30
ASSY II
Register now and access more than 125,000 products
AW drive
- Improved power transmission
- Longer service life
- Optimal centring
- Negligible risk of screw coming loose
Milling head
- Automatic countersinking in all types of wood and wood-based materials
- No cracks in the coating
- No cracks or material splitting with screws at the edges
Shaft
In most cases, no pre-drilling is required thanks to the special thickness of the shaft. This is dependent on the type of wood.
Thread
- Thanks to the asymmetric double-speed thread provided by a plastic sliding layer, the processing time is halved and a 40% higher torque is achieved at the same screw-in resistance when compared to traditional chipboard screws.
Tip
- The 25° tip allows the screw to be easily centred and positioned with precision on hard surfaces.
Datasheets(X)
 | |
Nominal diameter (d) | 4 mm |
Length (l) | 30 mm |
Thread length (lg) | 24 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 8 mm |
Internal drive | AW20 |
Material | Stainless steel A2 |
Surface | A2 appearance |
Last viewed
Work jacket
Expansion joint profile With type V smoothing edge
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Valve setting blade
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Cylindrical roller bearing FAG
Hexagonal bolt with flange in accordance with MBN standard
Tubular rivet shape A
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)