ECOFAST ASSY® 3.0 Hardwood screw, stainless steel
ECOFAST ASSY hdwd screw sst A2 VD milling head AW
SCR-CS-CTRHD-HRDWO-A2-AW20-4X50
ASSY II
Register now and access more than 125,000 products
AW drive
- Improved power transmission
- Longer service life
- Optimal centring
- Negligible risk of screw coming loose
Milling head
- Automatic countersinking in all types of wood and wood-based materials
- No cracks in the coating
- No cracks or material splitting with screws at the edges
Shaft
In most cases, no pre-drilling is required thanks to the special thickness of the shaft. This is dependent on the type of wood.
Thread
- Thanks to the asymmetric double-speed thread provided by a plastic sliding layer, the processing time is halved and a 40% higher torque is achieved at the same screw-in resistance when compared to traditional chipboard screws.
Tip
- The 25° tip allows the screw to be easily centred and positioned with precision on hard surfaces.
Datasheets(X)
 | |
Nominal diameter (d) | 4 mm |
Length (l) | 50 mm |
Thread length (lg) | 44 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 8 mm |
Internal drive | AW20 |
Material | Stainless steel A2 |
Surface | A2 appearance |
Last viewed
Hexagonal bolt with shank
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
3/8 inch socket wrench insert metric, hexagon, short
Pre-tensioning element For rope system
Threaded rod with trapezoidal thread WN 976 with trapezoidal thread in accordance with DIN 103
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Burr heads with 1/4" hexagon shank
Divider assortment With compartment rails and compartment dividers for system dimensions 12.6
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain