ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z1-(A2K)-3X20/12
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d) | 3 mm |
Length (l) | 20 mm |
Thread length (lg) | 12 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 6.0 mm |
Internal drive | Z1 |
Material | Steel |
Surface | Zinc plated |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
Hexagon head bolt With thin shaft in hygienic design
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, steel 10.9, plain
G-fuse 5x20
Adjustable straight sealing cone male fitting ISO 8434-1, zinc-nickel-plated steel, metric male thread with o-ring
Empty box For machine taps
Electromagnetic hold-open device, single-leaf Non-hinge side With GTS 640 G and integrated smoke detector
Face wrench