ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z1-(A2K)-3X25/15
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
 | |
Nominal diameter (d) | 3 mm |
Length (l) | 25 mm |
Thread length (lg) | 15 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 6.0 mm |
Internal drive | Z1 |
Material | Steel |
Surface | Zinc plated |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
EPS profile thumbturn cylinder
EPS profile double cylinder
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Work dungarees
Counterbore DIN 373, fine
Countersunk head screw with H cross recess ISO 7046-2, A2-70 stainless steel, plain
Clamping jaws For manual riveting tool
ASSY® 4 COMBI timber screw Steel zinc plated partial thread hexagon head
Protective glove, knitted and coated
T-piece, reduced with solder connection EN1254, copper, 5130R
