ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z2-(A2K)-3,5X25/17
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d) | 3.5 mm |
Length (l) | 25 mm |
Thread length (lg) | 15 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 7 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated |
Last viewed
Weatherproof trousers
Fitting Brass, 16002
STC end mill Speedtwister-Inox, extra long XL, five cutting edges, uneven angle of twist gradient, 5xD
Tapping screws, pan head with collar assortment 1402 pieces in system case 4.4.1.
Grating/net sanding strip Mirka Abranet Ace HD
Split pin DIN 94, steel, plain
TIME-SERT® thread repair assortment 70 pieces
Adapter K
Hexagon nut, low profile with fine thread ISO 8675, steel 04, zinc-nickel silver
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive