ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z2-(A2K)-4,5X35/21
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d) | 4.5 mm |
Length (l) | 35 mm |
Thread length (lg) | 21 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 9.0 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated |
Last viewed
Aluminium eccentric lever with female thread
Release tool, vehicle-specific assortment 13 pieces
Flat-head screw with H cross recess ISO 7045, steel 4.8, plain
Threaded rod DIN 976, A2-70 stainless steel, shape A
System workbench 2000 mm with 2 fixed workbench feet and drawer wall-mounted cabinet 8.6
Hammer drill bit Max Quadro-L Vario
Polishing pads
Moveable flange
Screw extractor
Slotted cheese head DIN 84, steel 4.8, plain