ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z2-(A2K)-4X40/24
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d) | 4 mm |
Length (l) | 40 mm |
Thread length (lg) | 26 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 8 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated |
Last viewed
Hexagonal bolt with thread up to the head
Screw, fillister head inch
Low-cut safety shoes, S1P
High-performance anchor with countersunk screw
Hexagonal bolt with half dog point and small hexagon
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Countersunk head screw with nib and nut
Straight male fitting ISO 8434-1, stainless steel 1.4571, NPT male thread
Centre drill bit For socket cutter
Hexagon nut