ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z2-(A2K)-5X35/24
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
 | |
Nominal diameter (d) | 5 mm |
Length (l) | 35 mm |
Thread length (lg) | 20 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 10.0 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Slugging box wrench metric, straight
Low-cut safety shoes, S1
Work vest
Twist drill bit HSS DIN 1897 type RN
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
3/4-inch impact socket wrench insert For hexagon socket screws, metric, long
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Cover cap For tapping screws, A2 window sill screws, pias window sill screws
Divider OrgaAer
Occupational shoes
