ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z2-(A2K)-5X40/24
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d) | 5 mm |
Length (l) | 40 mm |
Thread length (lg) | 25 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 10 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated |
Last viewed
Wood screw Hexagon head DIN 571, steel zinc-plated blue
Work jacket
System case empty range 4.4.1
Round head screw with square neck DIN 603, steel 4.8, zinc-plated, blue passivated (A2K)
Nozzle For cordless blind rivet gun
1/2 inch impact socket wrench set inch hexagon Long, 11 pieces
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Clamping pin/clamping sleeve
Brass, metric lock nut in accordance with EN 60423 for EMC cable glands
1/2 inch socket wrench insert metric, hexagon, short