ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z2-(A2K)-5X60/35
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
 | |
Nominal diameter (d) | 5 mm |
Length (l) | 60 mm |
Thread length (lg) | 35 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 10.0 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Wedge lock washer W.TEC series Narrow shape
Clamping pin/clamping sleeve ISO 13337 spring steel plain
2-component thick-film lacquer
ASME B18.2.2 stainless steel 420 plain
Safety boots, S2
ORSY®BULL series 7 drawer box
Flat washer without chamfer ISO 7089 steel 300 HV, zinc flake silver
Perforated single guide rail For redoslide M15-HE and M15-HC furniture sliding door fitting
Work dungarees
Storage basket 90°, set of 2 For floor unit full-extension slide VS SUB Side, body width 150 mm
