ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z2-(A2K)-5X70/40
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d) | 5 mm |
Length (l) | 70 mm |
Thread length (lg) | 40 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 10.0 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated |
Last viewed
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Cable ties with plastic latch closure – industrial quality
Hexagon head bolt with thread up to head ISO 4017, A2-50 stainless steel, plain
Hexagon Socket Head Cap Screw
SNAP marker
Parallel pin with chamfered ends DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h11
Protective glove, knitted and coated
T-piece, reduced with solder connection EN1254, copper, 5130R
Low-cut safety shoes S1P
EPS profile thumbturn cylinder