ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z3-(A2K)-6X100/60
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
Datasheets(X)
 | |
Nominal diameter (d) | 6 mm |
Length (l) | 100 mm |
Thread length (lg) | 60 mm |
Head diameter (dh) | 12 mm |
Internal drive | Z3 |
Material | Steel |
Surface | Zinc plated |
Last viewed
Camshaft adjusting tool for FORD 1.0 petrol
Floor marking adhesive tape For food-processing areas and hygiene zones
WZ steel strapping
Fill level indicator
VDE 3/8 inch socket wrench, metric, hexagon, short
Work jumper, half-zip
Socks
Bottle drain tap Polypropylene white
Y-coupling Sundström R03-2127
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)