ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z3-(A2K)-6X120/70
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
Datasheets(X)
 | |
Nominal diameter (d) | 6 mm |
Length (l) | 120 mm |
Thread length (lg) | 70 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 12 mm |
Internal drive | Z3 |
Material | Steel |
Surface | Zinc plated |
Last viewed
Safety sandals S1
Insulated cable connector assortment 320 pieces in system case 4.4.1
Protective glove, nitrile
Tool head, small design For crimping pliers
Hexagonal cap nut, high profile DIN 1587, A4 stainless steel, plain
2-component toothed trowel
System insert, raster foam Pluck out the foam cubes to fit around items
1/2 inch socket wrench insert metric, hexagon, short
Ring screw A2 stainless steel, plain
Spacer washer