ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z3-(A2K)-6X50/30
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
 | |
Nominal diameter (d) | 6 mm |
Length (l) | 50 mm |
Thread length (lg) | 30 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 12.0 mm |
Internal drive | Z3 |
Material | Steel |
Surface | Zinc plated |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Work coat
Washer ISO 7090 steel 200 HV plain
Eventus door handle, escutcheon fitting
3/4" cardan joint
GPN 250 pipe protective cap Polyethylene (PE-LD/PE-LLD), yellow
Locking system, DPS
Hexagon head bolt with thread up to head ISO 4017, A2-50 stainless steel, plain
Fully threaded hexagonal bolt and fine thread
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Work coat
