ECOFAST® chipboard screw Steel, zinc-plated yellow, partial thread, countersunk milling head, PZ drive
ECOFAST steel zinc plated yellow partial thread Z
SCR-CS-CTRHD-WO-Z2-(A2L)-3,5X30/17
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated chipboard, medium-dense fibreboard sheets (MDF) and in all other wood and wooden materials.
- Won't crack coating
- No cracking or splitting of material when screwing at edges.
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Screws in easily due to sharp threads with glide-promoting coating.
- Precision positioning on hard surfaces like coated and waterproof chipboard and all types of wood, wooden materials and medium-dense fibreboard sheets (MDF).
Not for outdoor use.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d) | 3.5 mm |
Length (l) | 30 mm |
Thread length (lg) | 17 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 7.0 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated yellow |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE
Screwdriver PH striking cap with hexagon shank
Tile adhesive CERAfix® 404-2 C2 FT S1 Flex/XL
Timing tool set 7 pieces, for Opel 1.0-1.2-1.4, petrol
Filter unit with hood Sundström SR 76-3
Metric double box-end wrench Hexagon with POWERDRIV®
Flat scraper Martor Scrapex 5196.02
Hexagon nut, inch
Threaded rod