ECOFAST® chipboard screw Steel, zinc-plated yellow, partial thread, countersunk milling head, PZ drive
ECOFAST steel zinc plated yellow partial thread Z
SCR-CS-CTRHD-WO-Z2-(A2L)-4,5X80/50
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated chipboard, medium-dense fibreboard sheets (MDF) and in all other wood and wooden materials.
- Won't crack coating
- No cracking or splitting of material when screwing at edges.
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Screws in easily due to sharp threads with glide-promoting coating.
- Precision positioning on hard surfaces like coated and waterproof chipboard and all types of wood, wooden materials and medium-dense fibreboard sheets (MDF).
Not for outdoor use.
 | |
Nominal diameter (d) | 4.5 mm |
Length (l) | 80 mm |
Thread length (lg) | 50 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 9.0 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated yellow |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Machine tap For W.TEC® INSERT COIL helical inserts - made of HSCo; shape B
Contact spray SW
Reserve taper grooved dowel pin ISO 8741 steel plain
Long-life & Speed diamond cup wheel for hard material
Hexagon nut with flange EN 1661, A2-70 stainless steel, plain
Safety boots, S3
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HB shank
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
EPS profile double cylinder
Adjustable straight sealing cone male fitting ISO 8434-1, zinc-nickel-plated steel, metric male thread with o-ring
