ECOFAST® chipboard screw Steel, zinc-plated yellow, partial thread, countersunk milling head, PZ drive
ECOFAST steel zinc plated yellow partial thread Z
SCR-CS-CTRHD-WO-Z2-(A2L)-5X40/24
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated chipboard, medium-dense fibreboard sheets (MDF) and in all other wood and wooden materials.
- Won't crack coating
- No cracking or splitting of material when screwing at edges.
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Screws in easily due to sharp threads with glide-promoting coating.
- Precision positioning on hard surfaces like coated and waterproof chipboard and all types of wood, wooden materials and medium-dense fibreboard sheets (MDF).
Not for outdoor use.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d) | 5 mm |
Length (l) | 40 mm |
Thread length (lg) | 25 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 10.0 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated yellow |
Last viewed
Threaded rod DIN 976, A2-70 stainless steel, shape A
Parallel connector DIN 46341 T1
W-VD-A anchor rod A4 stainless steel
Malleable iron screw clamp with protective caps
Grooved taper-pin ISO 8744 steel plain
Identification rings, PVC
Screw cap for number plate screw
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Cable tie KBL 2 natural With plastic latch
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A