ECOFAST® chipboard screw Steel, zinc-plated yellow, partial thread, countersunk milling head, PZ drive
ECOFAST steel zinc plated yellow partial thread Z
SCR-CS-CTRHD-WO-Z3-(A2L)-6X100/60
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated chipboard, medium-dense fibreboard sheets (MDF) and in all other wood and wooden materials.
- Won't crack coating
- No cracking or splitting of material when screwing at edges.
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Screws in easily due to sharp threads with glide-promoting coating.
- Precision positioning on hard surfaces like coated and waterproof chipboard and all types of wood, wooden materials and medium-dense fibreboard sheets (MDF).
Not for outdoor use.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d) | 6 mm |
Length (l) | 100 mm |
Thread length (lg) | 60 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 12.0 mm |
Internal drive | Z3 |
Material | Steel |
Surface | Zinc plated yellow |
Last viewed
Safety boots, S3
Combi hexagon tapping screw with captive washer
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
EPS profile double cylinder
Threaded rod DIN 976, A2-70 stainless steel, shape A
Screw-on mounting base, PEEK
Vehicle dry sandpaper test set RED PERFECT® 100 pieces
Lanyard WAPS
Precision feeler gauge stock
ASSY® 4 RCS fittings screw Steel zinc plated full thread raised countersunk head