ECONOMY counterweight for bracket
CNTWGHT-PE-CONCRETE-12,5KG
Art.-no. 0838908021
EAN 4068362746185
Individual price display after login
Exclusively for trade customers
Register now and access more than 125,000 products
For the bracket of the ECONOMY temporary edge protection system.
- The counterweight is part of the ECONOMY temporary edge protection system.
- Consists of concrete filling in a polypropylene plastic core.
- The number of counterweights required depends on the railing configuration, location and building height.
Notice
- In the event of a return of goods as a gesture of goodwill, we are entitled to charge a restocking fee of 15 % of the value of the goods returned.
- During the installation of the edge protection system, appropriate protective measures must be taken to prevent a fall.
- When using the temporary edge protection system, the site-specific wind loads in accordance with EN 1991-1-4 must be observed. It is suitable for wind zones 1 and 2 with a maximum wind speed of 110 km/h.
- Certified in accordance with DIN EN 13374:2025 class A.
- This article is subject to extra transport costs. Please contact your local Würth sales representative for more information.
Product information
Datasheets(X)
Application area
- The ECONOMY edge protection system enhances protection at falling edges, such as roof edges and domed and strip roof lights without fall-through protection.
- The guardrails are fixed with weights or firmly fixed to the structure as a self-supporting system.
- The system is available with various brackets and fastenings on the parapet and base material.
- Suitable for the construction and maintenance of buildings and other structures.
- For use by skilled workers on roof surfaces that are not accessible to the public.
Instructions
- The counterweight is attached to the bracket with a dia. 4.8 x 50 mm stainless steel self-drilling screw.
Material | Concrete |
Last viewed
Heat protection glove KCL Karbotect 950
Composite plain bush with flange
Wire end ferrule with plastic sleeve
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1 Steel 8.8U, hot-dip galvanised
Threaded rod DIN 976-1 (type A) with standard metric ISO thread, A4 stainless steel
AL 420 drive handle
ECONOMY A2 grub screw
ISO insert holder with S clamping system for DC indexable inserts
Mini Nylon Fleece Disc
Overlapping cover cap, for hexalobular socket and AW drive