ECONOMY cover strip for base board
COVSTR-BASEBOARD
Art.-no. 0838908057
EAN 4068362760075
Individual price display after login
Exclusively for trade customers
Register now and access more than 125,000 products
Metal end caps for the open end of the base boards of the ECONOMY edge protection system.
- The cover strip is part of the ECONOMY temporary edge protection system.
- The base board is required in areas where the parapet is less than 150 mm.
Notice
- In the event of a return of goods as a gesture of goodwill, we are entitled to charge a restocking fee of 15 % of the value of the goods returned.
- During the installation of the edge protection system, appropriate protective measures must be taken to prevent a fall.
- When using the temporary edge protection system, the site-specific wind loads in accordance with EN 1991-1-4 must be observed. It is suitable for wind zones 1 and 2 with a maximum wind speed of 110 km/h.
- Certified in accordance with DIN EN 13374:2025 class A.
Product information
Datasheets(X)
Application area
- The ECONOMY edge protection system enhances protection at falling edges, such as roof edges and domed and strip roof lights without fall-through protection.
- The guardrails are fixed with weights or firmly fixed to the structure as a self-supporting system.
- The system is available with various brackets and fastenings on the parapet and base material.
- Suitable for the construction and maintenance of buildings and other structures.
- For use by skilled workers on roof surfaces that are not accessible to the public.
Instructions
- Place the metal end cap on the open end of the base boards and fasten to ensure a clean and protected finish.
EN standard | 13374:2025 |
Material | Aluminium |
Last viewed
Multi-purpose level CLIP-O-FLEX® For workstations manufactured from the Würth aluminium profile system WAPS®
Key, high profile DIN 6885, steel, plain, shape AB
Hexagon head bolt with thread up to head DIN 933, 8.8 steel with silver zinc-flake coating (ZFSHL)
Pipe nut with pipe thread DIN 431, A4 stainless steel, plain
Pneumatic die grinder DSG 25
Steel nail with riveted washer and discontinuous longitudinal corrugation
Flat cover cap, for hexalobular socket and AW drive
Pneumatic mini polisher DMP 25
Wire end ferrule with plastic sleeve
HSS bi-metal cylinder saw